RF-Solved Evaluation Kit

The RF-Solved evaluation kit contains everything needed to create a basic two node network, enabling examination of the features and capabilities of a Cy-Net ISM band solution. It primarily consists of two AM001 modules from Adaptive Modules which are in turn based on the Cyan Hunter reference design, including the eCOG1kG microcontroller, pre-programmed with the Cy-Net v2.0 stack. Each module is supported by an AM002 carrier board which provides power via external supply or batteries, serial comms and eICE interface. Using the serial port, the modules can be configured using the AT command set. Also included in the kit is the Cyan USB eICE adapter which allows the customer to access the eCOG microcontroller to customise the network software and exploit unused memory and instruction cycles.

A demonstration depicts the nodes in the network in a graphical environment, with distance / signal strength represented by the length of line from the master.

Additional modules and carrier boards are available to increase the size of the network.

Versions are available in 433, 868 and 915MHz.

Obfuscated stack source code is available on the Cyan website

Kit Features

• eCOK1kG microcontroller preprogrammed with Cy-Net v2 stack
• Micrel Radiowire® RF transceiver
• Configuration via AT command set.
• Customisation via eICE interface and CyanIDE toolchain
• Graphical demonstration of network in operation

Kit Includes

• 2x Adaptive Modules AM001 Cy-Net modules
• 2x Adaptive Modules AM002 carrier boards
• eICE USB Adapter
• USB lead
• Serial lead
• CyanIDE tools and documentation on CD
• Battery holder and batteries

Order Part Numbers:

• EVALKITRF-SOLVED4
• EVALKITRF-SOLVED8
• EVALKITRF-SOLVED9